



Miuzei Raspberry Pi Case
Yes, this is our new collection, check it out our new arrivals.
-
You've just added this product to the cart:
Miuzei Case for Raspberry Pi 4, Raspberry Pi 4b Case with Fan 35mm, with 5V 3A Power Supply, 4 pcs Heatsinks for Raspberry Pi 4 Model B 8gb / 4gb / 2gb
0 out of 5Miuzei Case for Raspberry Pi 4, Raspberry Pi 4b Case with Fan 35mm, with 5V 3A Power Supply, 4 pcs Heatsinks for Raspberry Pi 4 Model B 8gb / 4gb / 2gb
$15.99 -
0 out of 5
Miuzei Raspberry Pi 3B+ Case with Fan and Heat Sinks, 5V 2.5A Power Supply, Compatible with Raspberry 3 Model B+, Pi 3 Model B
- New case for raspberry pi 3b+/raspberry pi 3 b/raspberry pi 2
- Will not block Wifi/Bluetooth signal of raspberry pi, case was made of acrylic but not metal
- Case with raspberry pi fan and 3 pcs Heatsinks for Quick cooling the CPU/LAN/RAM
- Each accurate port can perfectly connect your output devices. Specially, this rpi case let you easier to access SD card by hand
- 1.5m/59in Micro USB cable–Easy to control pi charging with On/Off switch; Stable 2.5A to avoid pi reboot by insufficient power supply
-
0 out of 5
Miuzei Raspberry Pi 3B+ Battery Pack Expansion Board, USB Battery Pack with Acrylic Case for Raspberry Pi 3B+, 3B, 2B
- New Version: (Updated on Dec, 18th)UPS Battery pack expansion board for raspberry pi 3 model B+ / 3 / 2. The pi will not reboot when the power supply changed from the charger to battery
- Work up to 9 hours with 3800mAh capacity battery, output current: 2A, Supply two 3.7V lithium batteries connect together can help pi work longer
- With battery indicator LEDs show the current battery power and easy to turn ON/OFF the battery with the power switch on the battery board.
- Come with 2 pieces acrylic plates and special design micro USB cable, make pi and the battery combine together well
- With raspberry pi fan power interface can be used for connecting Raspberry pi fan(Need to solder pins of fan) without occupying the Raspberry Pi GPIO.
$24.99$22.99
Miuzei
Raspberry Pi
Case
RASPBERRY
COMPONENT
ARDUINO KIT | COMPONENT
Yes, this is our new collection, check it out our new arrivals.
FEATURED PRODUCTS
Check it out our new arrivals.
-
You've just added this product to the cart:
Miuzei 178° Full Screen Monitor 7 Model 1080P IPS Display (1024 x 600) LCD Small Display
0 out of 5Miuzei 178° Full Screen Monitor 7 Model 1080P IPS Display (1024 x 600) LCD Small Display
-
You've just added this product to the cart:
Miuzei Raspberry Pi 4 Power Supply with Switch, 5.1V 3A Power Supply Compatible with Raspberry Pi 4 Model B, USB-C Charger Power Adapter for RPI 4B
0 out of 5Miuzei Raspberry Pi 4 Power Supply with Switch, 5.1V 3A Power Supply Compatible with Raspberry Pi 4 Model B, USB-C Charger Power Adapter for RPI 4B
-
You've just added this product to the cart:
Laptop Stand, Miuzei Portable Adjustable Tablet Computer Stand, Aluminum Alloy Folding Laptop Stand Compatible MacBook Air Pro,HP,Lenovo More 10-15.6" Laptops & Tablet (Silver)
0 out of 5Laptop Stand, Miuzei Portable Adjustable Tablet Computer Stand, Aluminum Alloy Folding Laptop Stand Compatible MacBook Air Pro,HP,Lenovo More 10-15.6″ Laptops & Tablet (Silver)
$29.99 -
You've just added this product to the cart:
Miuzei Case for Raspberry Pi 4, Raspberry Pi 4b Case with Fan 35mm, with 5V 3A Power Supply, 4 pcs Heatsinks for Raspberry Pi 4 Model B 8gb / 4gb / 2gb
0 out of 5Miuzei Case for Raspberry Pi 4, Raspberry Pi 4b Case with Fan 35mm, with 5V 3A Power Supply, 4 pcs Heatsinks for Raspberry Pi 4 Model B 8gb / 4gb / 2gb
$15.99 -
You've just added this product to the cart:
Miuzei Raspberry Pi 4 Touch Screen with Case &Fan, 4 inch IPS Full-Angle Game Display, 800x480 Pixel, Support HDMI Input with Touch Pen, 4 Pcs Heatsinks, (Support Raspbian, Kali) Not include pi board
0 out of 5Miuzei Raspberry Pi 4 Touch Screen with Case &Fan, 4 inch IPS Full-Angle Game Display, 800×480 Pixel, Support HDMI Input with Touch Pen, 4 Pcs Heatsinks, (Support Raspbian, Kali) Not include pi board
- -Raspberry Pi 4 Inch IPS full-angle display, 800×480 physical resolution support HDMI input, refresh rate up to 60FP
- -Support HDMI audio output, data entry (computer, DVD), HDMI audio input, stereo 3.5mm audio output
- -Compatible with raspberry PI 3 motherboards (Need to buy a signal adapter for PI3) Display Support System: Raspbian, Kali-linux. Not supported: Pidora, Arch Linux ARM, Raspbmc, XBian, OpenELEC, Risc, window, LineageOS
- -Touchfunction Support System:Only support Kali, Raspbian . The 4 inch display monitor with touch control function (need to install touch driver), we offer pre-install driver system image file. could be used as standard HDMI output device for computer display(no touch function)
- -Housing assembly video (https://youtu.be/4Va3Imd8ByM) and system programming instruction video (https://tinyurl.com/rr3f2tn) Installation manual System download link See detailed description below
-
0 out of 5
Miuzei 35 Values Resistors Kit 1% Resistors Assortment (0-1M Ohm) 700 PCS Resistors with 5 LEDs, Photoresistor, Thermistor, 1pcs PCB Board
- 35 resistance values from 10 Ω to 1 MΩ,commonly used resistors like 100Ω,150Ω, 220Ω,330Ω,1kΩ, 10kΩ,20 pieces each value.
- Pack of 700 pcs metal film resistor,±1% tolerance,pin(0.022 inches, 0.55mm),24 lead SWG (Stand Wire Gauge)perfect for breadboard and electronic projects.
- Specially with 5pcs LEDs, a photoresistor,a thermistor and a PCB board.
- Packaging with PE bag in a plastic storage box help you to keep all the resistors organized.
- Each value is individually labeled and easy to identify, good quality with RoHS certification.
$26.99$23.99 -
You've just added this product to the cart:
Miuzei Flex Ribbon Cable for Raspberry Pi Camera- 6.5ft (2 Meter) 15 Pin 1.0 mm Pitch
-14%0 out of 5Miuzei Flex Ribbon Cable for Raspberry Pi Camera- 6.5ft (2 Meter) 15 Pin 1.0 mm Pitch
- 2 meter cable for raspberry pi camera is longer than standard cable, which is a good option to locate your camera
- Work fine with your need and would be flexible with camera placement.
- Specification–6.5 ft/2M 15 metal pin connectors, 1.0 mm Pitch
- Compatible with Raspberry Pi 3, 3 model b, 2, 2b and B+.
- Get it with Miuzei raspberry pi 160 wide- angle camera and make your job more flexible.
$13.99$11.99 -
0 out of 5
Miuzei Night Vision Camera for Raspberry Pi,Pi 3 Camera Module 5MP 1080p OV5647 Video Webcam Infrared IR LED Light Supports with Raspberry Pi 3B+ 3 2 Model B
- Web Camera for Raspberry Pi 3 – Compatible with Raspberry Pi 3B+, 3, 2 model B plus A+.
- 2pcs infrared LED – Supports night vision and video recording function.
- Can be manually adjusted according to the distance of the object. 5 Megapixel OV5647 sensor – Can be connecting infrared LED and/or fill flash LED.
- Used for attachment – Provides 3.3V power output.
- Night Vision Camera for Raspberry Pi, 5MP 1080p OV5647 Video Webcam Infrared LED Light.
$25.99$23.99 -
You've just added this product to the cart:
Miuzei Super Starter Kit Compatible with Arduino Projects with LCD1602 Module, Breadboard, Servo, 9V 1A Power Supply, sensors, LEDs, Detailed Tutorial MA13
0 out of 5Miuzei Super Starter Kit Compatible with Arduino Projects with LCD1602 Module, Breadboard, Servo, 9V 1A Power Supply, sensors, LEDs, Detailed Tutorial MA13
- More than 28 Lessons– Free PDF tutorial in the CD or easy to visit it on the mega cloud drive
- DIY more projects with fun–It’s a good way to learn programming language in projects for beginners or hobbyists
- Soldered components– Lcd1602, Ultrasonic distance sensor and Touch sensor modules with pin header, which don’t need to solder by yourself
- Come with 9V 1A Power supply– The all projects could finish by USB, it’s a complete kit for you
- Good quality storage box with divider plates– Avoid to mess up and get a tidy box